Notes On Installation; A Connecting Point For The Vehicle Speed Pulse Signal - Fujitsu Eclipse AVN51D Installation Manual

Connecting the v
Connecting the v
br ak e , and re
br ak e , and re
• • Check the vehicle speed pulse signal, parking brake signal, and reverse signal carefully before making
the connections. If the wires are incorrectly connected, accidents or problems with correct operation
may result.
• • The label on the vehicle speed pulse signal wire contains a protection circuit, so do not cut the wire or
remove the protective circuit, otherwise problems with operation may result.
• • Bind the wires together with tape so that they do not cause an obstruction while driving. If they become
wound or entageled around parts such as the steering wheel, shifting lever, or brake pedal, accidents
may result.
Tip
The locations where the vehicle speed pulse signal wire, parking brake signal wire, and reverse wire may
vary depending on the vehicle model and grade. Ask the car dealer or your nearest Eclipse dealer for
details.
- A connecting point for the vehicle speed pulse signal (example) -
Tip
Always be sure to connect the vehicle speed
pulse, otherwise the measurement precision will
be greatly reduced.
ehicle speed pulse
ehicle speed pulse
v erse wires
v erse wires

Notes on installation

- 10 -
, par
, par
Vehicle speed pulse
signal wire (vehicle harness)
Vehicle speed pulse
signal wire
(purple/white) of
connection wire
Contains a protective circuit
so never remove.
king
king
Engine computer
Splicing connector
(sold separately)