Setting Prior To Leaving; Recording The Callers' Messages; Preparing The Icm Tape; Listening To The Recorded Messages - Panasonic Easa-Phone KX-T1451 Operating Instructions Manual

Setting Prior to Leaving
RECORDING THE CALLERS' MESSAGES
1 Push POWER ON/OFF to ON.
oThe POWER indicator will lioht.
NOTES:
oThe unit will automatically switch itself to
the Answer mode 7 seconds after you set
the POWER ON/OFF switch or you
complete some other operations. When the
telephone rings, the unit will play back your
OGM, then it will record the callers'
messages on the tape.
rlf you do not want to set the unit to the
Answer mode, set the POWER ON/OFF
switch to OFF.
PREPARING THE ICM TAPE
After reviewing the Incoming Messages, the unit will automatically reset itself to the
Answer mode.
I To record future messages after the last message;
leave the unit as is. All calls will be saved.
I
To record the future messages from the beginning ol the tape;
1 Push REW.
POWER/IN USE
Indicalor
- 9 -
- 1 0 -
Listening to the Recorded Messages
oWhen Incoming Messages have been recorded, the ANSWER/CALL indicator will
flash. (Three flashes followed by a pause means that 3 messages were recorded.)
oln case of a power interruption, the ANSWER/CALL indicator will flash slowly after the
oower is restored.
LISTENING TO THE MESSAGES
7 Push PLAYBACK/PAUSE.
oThe playback volume is adjustable using
the VOLUME control (left side on your
u n i t ) .
AUTO-LOGIC (One-Touch Operation):
At the touch of the PLAYBACK/PAUSE button, the unit will automatically rewind and
play back all the recorded messages. At the end of the last message, you will hear
3 beeps. Atter 7 seconds, the unit will reset itself to the Answer mode. All calls will be
automatically saved.
Future Incoming Messages will be recorded after the last message.
To record the future messages from the beginning of the tape, push the REW
button.
To stop the tape temporarily during playback, push the PLAYBACK/PAUSE button
once. The lN USE indicator will llash. The tape will pause until you restart by
pushing it again.
To rewind the tape, push the REW button.
To fast forward the tape, push the FF button.
RE.PLAYING BACK ALL THE MESSAGES
wait until the ANSWER/CALL indicator is lit after playing back all the messages.
Push PLAYBACICPAUSE.
oThe unit will play back all the recorded messages again.
olf you push the PLAYBACK/PAUSE button before the ANSEWR/CALL indicator is
lit, push the REW button to rewind the tape. Within 7 seconds after rewinding,
push the PLAYBACI(PAUSE button to re-play back allthe messages.
T
I
T
I
I
1
2