Removal And Replacement Procedures; Preliminary Replacement Requirements; Tools Required; Service Considerations - HP PAVILION DV6 Maintenance And Service Manual

Preliminary replacement requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:
Flat-bladed screwdriver
■
Phillips P0 and P1 screwdrivers
■
Torx T8 screwdriver
■

Service considerations

Ä
CAUTION: The following sections include some of the considerations that you must keep in mind during disassembly and
assembly procedures.
✎
As you remove each subassembly from the computer, place the subassembly (and all accompanying screws)
away from the work area to prevent damage.
Plastic parts
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
Ä
CAUTION:
handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.
Cables and connectors
Ä
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly
process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the
cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid
bending, twisting, or tearing cables. Be sure that cables are routed in such a way that they cannot be caught or
snagged by parts being removed or replaced. Handle flex cables with extreme care; these cables tear easily.
Maintenance and Service Guide

Removal and replacement procedures

4
4–1