Before Assembly - Kenmore 146.16132110 Use & Care Manual

BEFORE ASSEMBLY

READ AND FOLLOW THE INSTRUCTIONS BELOW TO CORRECTLY UNPACK GRILL PARTS FROM
SHIPPING BOX.
Step 1: Once you open the top of the shipping box, slice down its four edges with a box cutter.
Take out the Hardware Pack, two grill side panels, back panel and bottom shelf. Next remove the
door bracket, back rail and warming rack. Note: Doors are packed inside left & right side panels,
remove doors from left and right panels by depressing the door pin and sliding it out (
figures
), please do not remove the Styrofoam until Step 2. Remove all parts from plastic bags.
Side panel & door
see below
Depress door pin & slide door out
16132-40200139 • 13