Memory Module - HP PAVILION DM3 Maintenance And Service Manual

Memory module

Description
1 GB, 1066 MHz DDR3
2 GB, 1066 MHz DDR3
4 GB, 1066 MHz DDR3
Before removing the memory module:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see
Remove the memory module:
1. Turn the computer upside down with the front toward you.
2. Slide the orange memory module cover release latch that located in the battery bay (1) and
secures the memory module cover to the computer.
3. Lift the cover off the computer (2). The mini-card compartment cover is included in the plastics
kit, spare part number 619450-001.
NOTE:
4. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
Battery on page
Small tabs hold the cover in place. Firmly pull up on the cover to release the tabs.
Spare part number
598859-001
598856-001
599092-001
34).
Component replacement procedures 39