Power Cable - HP PAVILION DM3 Maintenance And Service Manual

Power cable

Description
The power cable is included in the Cable Kit
Before removing the power cable:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Hard drive (see
c. Keyboard (see
d. Top cover (see
Remove the power cable:
1. Position the base enclosure with the front edge towards you.
2. Lift up on the power cable (1) and disconnect the cable from its routing (2) to remove the power
cable.
Reverse this procedure to install the power cable.
54 Chapter 4 Removal and replacement procedures
Battery on page 34)
Hard drive on page
Keyboard on page 42)
Top cover on page 45)
36)
Spare part number
626734-001