Table of Contents
Advertisement
1) Refer to the display for the programme time.
2) The consumption information shown in this chart is indicative. It can vary depending on the
quantity and the type of laundry, on the temperature of the water supply and on the
ambient temperature.
3) This is the programme for test institutes. It agrees with EN60456.
BEFORE FIRST USE
Put a small quantity of detergent in the
main wash compartment of the detergent
dispenser. Set and start a programme for
USING THE APPLIANCE
1.
Open the water tap.
2.
Connect the mains plug to the mains
socket.
3.
Press button
ance.
LOADING THE LAUNDRY
1.
Open the lid of the appliance.
2.
Push the button A (depending on
model). The drum opens automatical-
ly.
3.
Put the laundry. Make sure to not put
too much laundry into the drum.
4.
Close the drum and the lid of your
washing machine.
Before you close the lid of your
appliance, make sure that you
close the drum correctly.
to activate the appli-
1
A
cotton at the highest temperature without
laundry. This removes all possible dirt
from the drum and the tub.
4.
Put the laundry in the appliance.
5.
Use the correct quantity of detergent
and additives.
6.
Set and start the correct programme
for the type of laundry and soil.
ENGLISH
13
Advertisement
Table of Contents
