Water Drainage - AEG L 70260 TL User Manual

THE INLET HOSE
Do not use an extension hose if
the inlet hose is too short. Contact
the service centre for the replace-
ment of the inlet hose.
Water-stop device

WATER DRAINAGE

There are different procedures to connect
the drain hose:
90˚
A
1. Connect the hose to the appliance.
Loose the ring nut to set it in the cor-
rect position.
2. Connect the water inlet hose to the
cold water tap with 3/4 thread.
CAUTION!
Make sure that there are no leaks
from the couplings.
The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing. The
red sector in the window «A» shows this
fault .
If this occur, close the water tap and con-
tact the service centre to replace the
hose.
ENGLISH
27