I/O Device Configuration Sub-Menu - TYAN Tiger K8WE Manual

3.6.6 - I/O Device Configuration Sub-Menu

You can use this screen to select options for the I/O Device Configuration
settings. Use the up and down <Arrow> keys to select an item. Use the <Plus>
and <Minus> keys to change the value of the selected option.
Advanced
Serial port A:
Base I/O address:
Interrupt:
Serial port B:
Mode:
Base I/O address:
Interrupt
Parallel port:
Base I/O address:
Interrupt:
Mode:
DMA channel:
Floppy disk controller:
Base I/O address
↑↓: Select Item
F1: Help
← →: Select Screen Enter: Select
Esc: Exit
F10: Previous Values
Feature
Serial port A
Base I/O address
Interrupt
Serial port B
Mode
Base I/O address
PhoenixBIOS Setup Utility
[Disabled]
[3F8]
[IRQ 3]
[Disabled]
[Normal]
[3F8]
[IRQ3]
[Disabled]
[378]
[IRQ5]
[Output only]
[DMA1]
[Disabled]
[Primary]
-/+: Change Values
Sub-Menu
Option
Disabled
Enabled
3F8
2F8
IRQ3
IRQ4
Disabled
Enabled
Normal
IR
3F8
2F8
54
http://www.tyan.com
Item Specific Help
F9: Setup Defaults
Description
Configure serial port A
using options.
Set the base I/O address
for serial port A.
Set the interrupt for serial
port A.
Configure serial port B
using options.
Set the mode for Serial
port B using options.
Set the base I/O address
for serial port B.