To Delete A Password - HP OMNIBOOK OmniBook 3000 Evaluator Manual

Important
Be sure you record your password in a safe place. If you forget your password, you
might need to return your OmniBook PC to Hewlett-Packard for repair. You will also
need your proof-of-purchase. Call Hewlett-Packard at the number in the Support and
Service booklet.

To delete a password

1. Reset the computer and press F2, when prompted, to enter the BIOS Setup
2. Select the Security menu.
3. Select Set System Password, then Press Enter.
4. Type the current password, then Press Enter.
5. Press Enter at the Enter New Password prompt.
6. Press Enter at the Confirm New Password prompt.
7. Press Continue to save changes.
8. Press F10 to save and exit BIOS Setup.
Utility. Active keys are described along the bottom of the screen. (The TouchPad
does not work in BIOS Setup.)
Introduction
Protecting the OmniBook
1-19