Turning On/Off Message Waiting Led On Another Extension; Call Transfer - Toshiba Strata CIX User Manual

The Basics

Call Transfer

Turning On/Off Message Waiting LED on Another
Extension
If you call an extension and it is busy or there is no answer, you can light that
extension's Message Waiting LED and enable that extension to call you back.
1. Dial an internal extension. You hear busy tone or there's no answer.
2. Press
3. Hang up. The Msg LED on the called telephone flashes until the called party
presses the flashing
4. To turn Off a Message LED that you have turned on for another extension, press
#64
your telephone.
Call Transfer
1. While on a call, press
2. Dial the extension where the call will be transferred. You can remain on the line
and announce the call or immediately "blind transfer" the call.
During call transfer, you can connect all three parties by pressing
• If you get voice mail, you can leave a message or hang up and let the
transferred caller leave a message.
• If you hear a long single tone, then announce the call over the called phone's
speaker.
3. Transfer with Camp On: If the station to which you want to transfer the call is
busy, you may hang up and the transferred trunk or station will be camped on to the
busy destination.
ä
To transfer a call directly to Voice Mail (VM)
1. While on a call, press
2. Enter
3. Enter the VM mailbox number (usually the same as the extension number), press
#
. The call transfers immediately and your extension becomes idle.
4
7
. The Msg LED flashes red on the called phone.
Msg
plus the extension number that has the message light set. Hang up to release
Flash
Flash
#407
.
button - which calls you back.
. You hear internal dial tone.
.
Flash
Strata CIX Standard Telephone
.
02/06