Toshiba Strata CIX User Manual page 36

Advanced Operation
Speed Dial
Long Speed Dial Numbers
Speed Dial Numbers are stored sequentially in memory areas capable of holding 32
digits. If you exceed 32 digits, the excess are stored in the next higher area and
consume the next sequential Speed Dial Number.
You can dial the entire string by entering the original Speed Dial Number and all digits
will be sent, including those in excess of 32. If that were Speed Dial Number 100,
Number 101 would no longer be available. You are not prevented from storing a new
Number 101 but, if you do, Number 100 will be shortened to 32 digits.
*
When
to insert a seven-second pause would consume two of 32 characters.
*
" " functions as an escape key indicating that the number immediately following
represents something exceptional. The numbers are defined in
Table 3 Dial String Characters
Entry
0~9
#
*
*
(1~9)
**
*
#
26
is used as an escape character, it consumes one Speed Dial digit. Entering
0~9
End of Speed Dial Number when entering via access code (
Escape
Pause (1~9) seconds. If you need to pause longer than nine seconds, enter additional
pause escape sequences. For example, to insert a 17 second pause, enter
display of a pause in the Speed Dial Number shows a "P" without specifying the
duration. In this example, you would see "PP."
*
#
Meaning
#66)
Strata CIX Standard Telephone
*
Table 3.
*9*8
. The
02/06
7