Installing The Battery Pack - Toshiba T2150CD Series Manual

Installing the Battery Pack

To install a battery pack, follow the steps below.
CAUTION
There is danger of explosion if the battery is incorrectly replaced.
Use only the same or equivalent battery recommended by Toshiba.
Return spent batteries to your dealer for environmentally safe
disposal.
1. Turn the computer's power off.
2. Carefully insert the new or recharged battery pack. Set the grooved end against the
battery contacts first, then lay the battery in place. Be sure the end of the plastic tab lies
on top of the battery.
CAUTION
When you open the palm rest, cables to the AccuPoint buttons are
exposed. Be careful not to apply tension to these cables or to pinch
them when you close the palm rest.
3. Close the palm rest and gently push it into position.
4. Push the latches back into place. Press gently until you feel them click.
5. Turn the computer back on and continue working.
Care of the Power Cord
The computer's internal converter eliminates the need for an external AC adapter, thus
enhancing the portability of your computing system. You need only the power cord to run the
computer from an AC power source. When carrying the cord, be careful not to fold it too
Figure 7-2 Removing the battery pack