HP Compaq nx7000 Maintenance And Service Manual page 47

Troubleshooting
Select
Device Options
(continued)
*Video modes vary even within regions. However, NTSC is common in North
America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in Japan; and
PAL-M, in Brazil. Other South and Central American regions can use NTSC,
PAL, or PAL-M.
2–6
Table 2-3
Advanced Menu (Continued)
To Do This
■
Change the parallel port mode from
Enhanced Parallel Port (EPP, the default
setting) to standard, bidirectional EPP, or
Enhanced Capabilities Port (ECP).
■
Set video-out mode to NTSC (default), PAL,
NTSC-J, or PAL-M.*
■
Enable/disable all settings in the
SpeedStep
selected, the notebook runs in Battery
Optimized mode.)
■
Specify how the notebook recognizes
multiple identical port replicators that are
identically equipped. Select Disable to
recognize the port replicators as a single port
replicator; select Enable to recognize the port
replicators individually, by serial number.
■
Enable/disable the reporting of the processor
serial number by the processor to the
software.

window. (When Disable is
Maintenance and Service Guide