Checking Engine Oil Level - MULTIQUIP RX 1510-C Operation Manual

RX 1510-C/-I/-CI
8.3

Checking engine oil level

Danger of burning!
The engine and its detachable parts are hot during and immediately after
operation.
► Before touching the engine or the detachable parts first allow these to cool
The dipstick (OS) is located on the right side of the engine underneath the cooling
water tank. The engine has been filled in the factory with engine oil, viscosity
class 15W40. If there is the need to change to a different viscosity class (e.g.:
permanent extreme outdoor temperatures), the oil must be changed.
1) Park the machine on flat ground.
OS
down.
2) Pull the dipstick out.
3) Wipe the dipstick with a dry, fibre-free rag.
4) Insert the dipstick up to the stop in its fixture.
5) Pull the dipstick out again and read the oil level. ► The oil level should be between
the two markings. More engine oil must be filled in, if the oil level is too low (only
use engine oils with the same viscosity).
Maintaining the machine
CAUTION
– 85 –