Starting The Machine With The Manual Control Device - MULTIQUIP RX 1510-C Operation Manual

RX 1510-C/-I/-CI
The ignition start switch has a starter anti-repeat function. The starter is not
activated anymore, if the engine is running.
► At the most 15 seconds continuous starting and in between breaks of approx.
► Identify and repair cause of malfunction (malfunction table), if the engine
5.3.4
Start Stop
1 minute.
should not start.
Code „F 4020" lights up: The motor has started.
► Release ignition key. The ignition key returns automatically to „Ignition position
1".
1
After engine start-up

Starting the machine with the manual control device

► Press the "Start" key on the manual control. The following code is displayed:
„FH 4010". The LEDS for generator and oil pressure drop extinguish. The
starter is active, as long as the "Start" key is pressed.
NOTE
F 4020
FH 40 I0
– 67 –
Start-up