Start-Up; Safety Instructions; Examination Before Start-Up; Checking Hydraulic Oil Level - MULTIQUIP RX 1510-C Operation Manual

RX 1510-C/-I/-CI
5.

Start-up

5.1

Safety instructions

5.2

Examination before start-up

5.2.1
Only qualified and appropriately trained specialised personnel, with a minimum
age of 18 years, may operate the machine. Persons acting under the influence of
drugs, medicines or alcohol may not operate the machine.
Before putting the machine into service every day or before a long work period,
the following checks must be performed. The safety regulations must be observed
hereby.
The following must be checked:
• The function of all safety equipment
• Whether the transport protection has been removed
• All bolt connections for firm fit
• Fuel tank and fuel lines for leaktightness
• Machine and engine for damages
• Function of the control elements
• Function of the steering system
• Hydraulic system for leaktightness

Checking hydraulic oil level

The sight glass for the examination of the hydraulic oil level is located under the
operating panel. The fill level should be within the sight glass.
S
– 59 –
Start-up