DCS 954 User Manual page 28

dCS 954 User Manual
dCS Ltd
S-No
Flip
Loc
End
Manual part no: DOC136954 iss 2B1
Contact on + 44 1799 531 999
dCS
(inside the UK replace + 44 with 0)
The control board serial number scrolls along the display. You will need
something to write this on, if you call us for help.
channels). Normally set to Off. If you find the Left and Right outputs from
(Flip
your system are reversed due to a connection error, set
swap them back. The main display shows
Flip is not stored at power down so you should correct the error and turn
Off.
(Lock/Unlock front panel). Front panel Lock, normally Off. Set to
unauthorised changes using the front panel buttons. The menu has to be
accessed to turn the lock off again.
Exits the menu.
Manual for Standard Software Version 1.5x
-
-
Flip.d
-
-
Page 28
June 2000
Flip On
to to digitally
while this feature is turned on.
On
to prevent
file 135954ma2b1.pdf available from website
email to: more@dcsltd.co.uk
web site: www.dcsltd.co.uk
Flip