HP Compaq Mini CQ10 Maintenance And Service Manual page 75

7. If you need to remove the display panel from the display enclosure, remove the 4 Phillips 2.0×4.0
screws (1) that secure the panel to the enclosure, lift the top of the display panel (2), and then
rotate it up and out of the display enclosure. The display panel is available using spare part
numbers 624218-001 (10.1-in, WSVGA, AntiGlare display panel for use with HP Mini 110 and
Compaq Mini CQ10 computer models) and 646912-001 (10.1-in, WSVGA, AntiGlare display
panel for use with Compaq Mini CQ10 LTE computer models).
8. If you need to remove the display/webcam cable assembly, disconnect the display cable (1) from
the connector (2) on the back of the display panel. The display/webcam cable is available using
spare part numbers 633490-001 (for use with HP Mini 110 and Compaq Mini CQ10 computer
models) and 657464-001 (for use with Compaq Mini CQ10 LTE computer models).
Component replacement procedures
67