Memory Module - HP Compaq Mini CQ10 Maintenance And Service Manual

Memory module

Description
1-GB memory module (667-MHz, DDR3)
2-GB memory module (667-MHz, DDR3)
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Service access cover (see
Remove the memory module:
1. Pull away the retention clips (1) on each side of the memory module to release the memory
module. (The memory module tilts up.)
CAUTION:
the components on the memory module.
52 Chapter 4 Removal and replacement procedures
Battery on page 40).
Service access cover on page
To prevent damage to the memory module, hold it by the edges only. Do not touch
Spare part number
621563-001
621567-001
43).