Table of Contents
Advertisement
11. T
ECHNICAL
Audio Inputs (four)
Type
Impedance (Ω)
Common Mode Rejection
Maximum level
Audio Outputs (eight)
Type
Minimum load impedance
Source impedance
Maximum level
Performance (20Hz to 20kHz)
Frequency response
Distortion @ +8dBu
Dynamic range (unweighted)
Input Processing (per channel)
Gain
Delay
Parametric EQ 1-12
Boost/cut:
Bandwidth:
Compressor
Threshold:
Attack:
Release:
Ratio:
Knee:
Bypass:
Output Processing (per channel)
Routing from Inputs
Phase invert
Output gain
Delay
Output phase correction filter
Phase angle:
Angle Reference:
Output all-pass filter
Freq. Range:
Phase shift
nd
Q (2
order only)
S
PECIFICATION
Electronically balanced (Pin 2 Hot)
Balanced 20k, Unbalanced 10k
>80dB @ 1kHz
+ 21dBu
Electronically Balanced (Pin 2 Hot)
56Ω /20nF
56Ω
+ 21dBu into > 2kΩ
+/- 0.3dB with all filters and EQ flat
<0.02%
>113dB
+12dB to -40dB in 0.1dB steps plus Off
0 to 1 second in 20.83 us steps
(0 - 343.53 m or 0 - 1127' 0" at 20 C)
Frequency range: 20Hz to 20kHz in 21 steps per octave
+6/-18dB in 0.1dB steps
3.0 to 0.08
+21dBu to -10dBu in 0.1dB steps
40 s to 100ms in 20 s steps and 100ms –1s in 1ms steps
10ms to 2000ms in 10ms increments
1:1 to 5:1 in unit increments
Hard/Soft
Yes/No
None
From Channels A, B, C or D
From Channels A+B or C+D, with ratio control, attenuated by 6dB before summing
From Channels A+B+C+D, attenuated by 12dB before summing
Note: Sources comprising summed channels are only available if the input channel delays for
the summed channels are set to the same value.
Normal/invert
+12dB to –40dB in 0.1dB steps plus Off
0 to 300 milliseconds
(0 – 103.06 m or 0 - 338' 1" at 20 C)
0° to 180° in 5° steps. 0° is off
LPF, HPF, LEQ/PEQ1, PEQ2, 3, 4, 5, or HEQ/PEQ6
20Hz – 20kHz in 21 steps per octave
st
o
nd
o
1
(90
) or 2
(180
) order
0.4 to 6.0
Technical Specification
31
Hide quick links:
Advertisement
Table of Contents
