Turning The Power On - Clarion NX404 Quick Start Manual & Installation Manual

[RESET] Button
• Press this button to hardware reset the unit.
Note: When the [RESET] button is pressed, frequencies of radio stations, titles, etc.
stored in memory are cleared.
[microSD slot ]
Insert a microSD Card for MAP here. The microSD card for MAP is sold separately.
Note: The microSD card is only for navigation. Please don't insert microSD card for
other purpose. After insertion of microSD card for MAP, don't remove it; otherwise,
the navigation function will be disabled.
[AUX IN]
AUX 1 Connector.
[Microphone]
This is used for Bluetooth phone.
[IR] SENSOR
•Receiver for the remote control unit (operating range: 30 degree in all directions).

3. TURNING THE POWER ON

VOL/PWR
Selecting a Source
• Press [MENU] button on the PANEL to show main source menu.
• Change page by dragging left or right or touching other buttons.
• Touch the icons on the screen to enter corresponding work mode, such as Disc
mode, Tuner mode, Telephone mode, etc.
Start the engine. The power is
supplied to this unit.
Press [POWER] button on the
panel to turn on the unit.
NX404 7