Clarion NX404 Quick Start Manual & Installation Manual page 32

Blue White
Orange White
Note:
*1: Connecting the PHONE INTERRUPT terminal
The phone interrupt will mute the audio if the lead receives a negative or ground signal.
Y ellow
Connect directly
+12V
to battery
Black
Ground
Purple
Rear right +
Purple Bla ck
/
Rear right -
Red
+12V accessory
Gray
Front right +
Gray Bla ck
/
Front right -
White
Front left+
White Bla ck
/
Front left-
Green
Rear left+
Green Blac k
/
Rear left-
/
Amplifier turn on cord
-
/
Illuminatio n
Blue
Auto antenna
Brown
Phone interrupt
Grass- green
Parking brake cord
Purple Whit e
/
Reverse gear cord
Connecting the parking brake cord
Connect the cord to parking brake lamp ground in the meter panel.
Note:
• Connecting the parking brake cord to lamp ground allows you to watch iPod/iPhone video/DVD video/AV input
when the parking brake is engaged.
• When the parking brake cord is not connected, the monitor will not show any video sources.
• If "AUDIO ONLY" appears on the screen just after turning on the ACC power of the car, release the parking
brake while confirming safety, and then engage the parking brake again.
Parking brake lamp
cord to battery
Parking brake
Electro-tap
Parking brake
signal cord
Parking brake cord (Grass-
green)
How to attach the electro-tap
1. Place the Parking brake cord at the stopper,
and fold it back in the direction of the arrow
2. Pass the Parking brake signal cord through,
and fold it back in the direction of the arrow.
Parking brake signal
cord Parking brake signal
cord
Stopper
Parking brake cord
(Grass-green)
NX404 31