Siriusxm Advisory Messages; Tv/Vtr (When Connecting An Optional Tv Tuner, Etc.) - Clarion NZ503 Owner's Manual & Installation Manual

SiriusXM Advisory Messages

Message
Check Tuner
Check Antenna
No Signal
Channel Not Subscribed
Channel Not Available
Channel Locked
Subscription Updated

TV/VTR (When connecting an optional TV tuner, etc.)

Problem
The image is not
displayed.
The display is dark.
When the camera is
connected, the image is
disturbed.
There are red, green, and
blue points in display.
56 NZ503
Description
Check the SiriusXM tuner connection on the back of the unit to ensure that its
correctly connected.
Ensure the SiriusXM antenna cable is connected to the SiriusXM tuner correctly.
Check the SiriusXM antenna wire for breaks or sharp bends. Replace the antenna if
necessary.
Load "Factory default" settings on Setting menu. If the message remains, the
antenna may have been damaged.
The vehicle must be outside, and the antenna must have a clear view of the
southern sky.
This channel is not included in your SiriusXM subscription plan. Call 1-877-438-9677
to subscribe.
This channel is not a valid SiriusXM channel.
The channel number has been entered incorrectly, or the channel was removed from
the SiriusXM channel lineup.
The selected channel has been locked by the parental controls, or a mature channel
has been selected.
A prompt to enter the unlock code will appear. Enter the unlock code as described
on page 46.
An update to your SiriusXM subscription has been received by the SiriusXM tuner.
Press any button to continue.
Cause
The parking brake is not
engaged.
The brightness control is too
low.
The operating condition is
not good.
The headlight of the vehicle
is lit
Improper NTSC/PAL setting
--------------------
Measure
Check that the parking brake is engaged.
Adjust the brightness properly.
The temperature inside the vehicle may be 0 or
lower. Set to an appropriate temperature (25 or so)
and check it again.
The display is made dark at night to prevent the
glare (When the headlight of the vehicle is lit in the
daytime, the display gets dark).
Set the PAL/NTSC properly according to the
camera.
This is not a failure, but a phenomenon peculiar
to a liquid crystal panel (The liquid crystal panel is
produced according to technology with very high
precision. Note that, though there are effective
pixels of 99.99% or more, pixel missing or normally
lit pixels account for 0.01%).