HP G62 Maintenance And Service Manual page 92

e. Display assembly (see
f. System board (see
g. Fan/heat sink assembly (see
Remove the processor:
1. Turn the processor locking screw (1) one-half turn counterclockwise until you hear a click.
2. Lift the processor (2) straight up and remove it.
NOTE:
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
82 Chapter 4 Removal and replacement procedures
Display assembly on page
System board on page
The gold triangle (3) on the processor must be aligned with the triangle icon (4)
68)
74)
Fan/heat sink assembly on page 77)