Audio Board - HP Compaq Presario F700 Maintenance And Service Manual

Audio board

NOTE:
All audio board spare part kits include an audio board cable.
Description
Includes infrared transceiver
Does not include infrared transceiver
Before removing the audio board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Switch cover (see
c.
Keyboard (see
d.
Display assembly (see
e.
Top cover (see
f.
System board (see
g.
Remove the audio board:
Remove the audio board cable from the clips built into the base enclosure (1).
1.
Remove the two Phillips PM2.5×5.0 screws (2) that secure the audio board to the base enclosure.
2.
68 Chapter 4 Removal and replacement procedures
Battery on page 37).
Hard drive on page 40)
Optical drive on page
Switch cover on page
Keyboard on page 52)
Display assembly on page
Top cover on page 63)
System board on page
48)
50)
56)
65)
Spare part number
431444-001
465229-001