System Board - HP Compaq Presario F700 Maintenance And Service Manual

Lift the rear edge of the top cover (1) and swing it (2) up and forward until it rests at an angle.
7.
Remove the top cover
8.
Reverse this procedure to install the top cover.

System board

NOTE: All system board spare part kits include replacement thermal material.
Description
System board with ExpressCard assembly
System board without ExpressCard assembly
Before removing the system board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Switch cover (see
c.
Keyboard (see
d.
Display assembly (see
e.
Top cover (see
f.
Battery on page 37).
Hard drive on page 40)
Optical drive on page
Switch cover on page
Keyboard on page 52)
Display assembly on page
Top cover on page 63)
48)
50)
56)
Component replacement procedures
Spare part number
461861-001
461860-001
65