Chicago Electric 96298 Operating Instructions Manual page 9

Lithium powered 10.8 volt cordless driver
Table of Contents

Advertisement

When unpacking, check to make sure that the product is complete and undamaged.
If any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
1.
The Battery Pack (19) requires charging before use. The recommended initial charge
time is twelve hours, prior to first use of the Cordless Driver.
Note: Always switch to a fresh battery when tool performance begins to diminish. Severe
heat is destructive to batteries; the more heat generated, the faster the battery will
lose power. A battery that gets too hot can be permanently damaged. Never over-
discharge a battery by using the tool after performance decreases. Never attempt to
discharge a battery by continuing to pull the trigger. When tool performance begins
to diminish, stop the tool, recharge the battery, and use a fully charged battery for
optimal performance.
2.
When the Battery Pack-after the initial charge-requires recharging it must charge
for five to seven hours in order to operate at full power.
3.
Charging room temperature: 50° F. – 104° F.
4.
Depress both buttons at the rear of the Battery Pack and slide the unit down to
detach from the Driver.
5.
Insert the Battery Pack (19) into the Charger (24) (the Battery Pack can only fit into
the Charger in one position), plug Charger
into Adapter (25), and plug Adapter into any
standard electrical outlet.
6.
While charging, the Battery Pack, Charger,
and Adapter may become warm to the touch.
This is normal, and does not indicate a prob-
lem.
7.
When the Battery Pack is in the Charger,
both the red and green lights on the Charger
will be illuminated while charging, when the
Battery Pack is fully charged the red light
will turn off, indicating that the Battery Pack
is ready for use. Once the Battery Pack is
fully charged, unplug the Charger from the
electrical outlet, unplug the Charger from the electrical outlet and remove the Bat-
tery Pack from the Adapter.
for technical questions, please call 1-800-444-3353.
SKU 96298
UNPACKiNG
CHARGiNG (iNiTiAL CHARGE)
battery
battery
Pack (19)
Pack (19)
Adapter
Adapter
(25)
(25)
Charger
Charger
(24)
(24)
PAGE 9

Advertisement

Table of Contents
loading

Table of Contents