Assembling Your Pedestal Fan - Sunbeam FA8600 Instruction Booklet

Assembling Your Pedestal Fan

1.Unpack all the components from the box.
2.Unfasten the interlocking nut and blade
knob from the front of the motor
(See Figure 2) and place to one side.
Figure 1
3.Attach the rear fan blade grill and ensure it
is in the correct orientation with the "UP"
and the two holes aligned at the top
(See Figure 1). Firmly screw on the
interlocking nut.
4.Mount the fan blade onto the motor shaft;
and fasten the blade knob firmly by turning
in an anti-clockwise direction.
See Figure 2.
Figure 2
6
5.Open the front guard clip and attach the
fan blade grill with the "UP" word (which
appears on the inside of the grill), the
Sunbeam logo should be straight. Push the
round edges of the grill firmly together with
the back grill and lock the clip. Using a
Phillips head screwdriver, tighten the screw
provided. See Figure 3.
Figure 3