Table of Contents
Advertisement
NIC1 LED
The NIC1 (Network Interface Control-
ler) LED connection is located on pins
11 and 12 of JF1. Attach the NIC1
LED cable to display network activity
on LAN1. Refer to the table on the
right for pin defi nitions.
NIC2 LED
The NIC2 (Network Interface Control-
ler) LED connection is located on pins
9 and 10 of JF1. Attach the NIC2 LED
cable to display network activity on
LAN2. Refer to the table on the right
for pin defi nitions.
Universal Information LED
Connect an LED to pins 7 and 8 of
JF1 to provide advanced warning of
chassis overheating, a fan failure or
a power supply failure. These pins
also work with the front UID indicator,
which will activate as either a solid
or fl ashing blue LED depending on
whether the LED was activated via
IPMI or the UID button. Refer to the
tables on the right for pin defi nitions
and status indicators.
Chapter 5: Advanced Motherboard Setup
Pin Defi nitions (JF1)
Pin#
11
12
Pin Defi nitions (JF1)
Pin#
9
10
Universal Information LED
Pin Defi nitions (JF1)
Pin#
Defi nition
7
UID LED Signal
8
OH/Fan Fail/Pwr Fail Signal
Red LED Indications
State
Solid
Blinking (1/4 Hz)
Blinking (1 Hz)
Blue LED Indications
State
Solid
Blinking
5-13
NIC1 LED
Defi nition
Vcc
NIC1 Active
NIC2 LED
Defi nition
Vcc
NIC2 Active
Indication
Overheat
Power Fail
Fan Fail
Indication
UID (via Button)
UID (via IPMI)
Advertisement
Table of Contents
