Table of Contents
Advertisement
5-7
Adding PCI Cards
1. PCI Expansion Slots
Two riser cards are used to support add-on cards to the system. The SC815TQ-
R450U chassis can accommodate two standard (full-height full-length) and one
low-profi le PCI expansion cards.
PCI cards are installed into riser cards that have been pre-installed to the system.
See the confi guration list below.
2. PCI card installation
Before installing a PCI add-on card, make sure you install it into the correct riser
card. Begin by releasing the locking tab on the I/O backplane that corresponds to
the slot you wish to populate. Insert the expansion card into the correct riser card,
pushing down with your thumbs evenly on both sides of the card.
PCI Slot/Card Confi gurations
Riser Card
RSC-R1UU-UE8
RSC-R1UU-2E8
RSC-R1UU-E8R+
Chapter 5: Advanced Motherboard Setup
Expansion card(s) supported
1x UIO card and 1x PCI-E x8 card (left side)
2x PCI-E x8 cards (left side, optional)
1x PCI-Express x8 low-profi le card (right side)
5-9
Advertisement
Table of Contents
