Adding Printers In Macintosh; Rendezvous Printing In Mac Os X - Axis 5400plus User Manual

Adding Printers in Macintosh

Section 5 Adding Printers in Macintosh

Rendezvous Printing in Mac OS X

34
Having connected the AXIS 5400+/AXIS 5600+ to your network, this
section now describes how to set up your print server for printing in Mac
OS X and earlier Macintosh environments using AppleTalk.
If you intend to use the print server in a multi-protocol environment,
refer to the chapters pertaining to the respective operating systems in this
manual.
Rendezvous is available from Mac OS X 10.2 and up. Rendezvous is
enabled by default in the print server. You can alter the Rendezvous
parameters from the print server's Web interface: select Admin | Network
Settings | Detailed View | TCP/IP Network.
1. From the Apple menu, select Go | Applications | Utilities and start the
Print Center or the Printer Setup Utility.
2. Click Add in the Printer List.
3. From the drop-down list, select Rendezvous.
4. High-light the printer you want to install. The print server's default name
is AXISxxxxxx Network Print Server (where the xs represent the last six
digits of the print server's serial number) followed by the ports available.
Example: AXIS610282 Network Print Server_LPT1.
5. Select printer manufacturer and model from the drop-down list. (For some
printer drivers, Printer Manufacturer and Model are selected automatically.)
AXIS 5400+ / AXIS 5600+ User's Manual