Axis 5400plus User Manual page 44

Adding Printers in NetWare
44
9. You will find the print server in the next window with the printer attached
on the connected port. Depending on the transport protocol you used when
you start the installation, the print server should appear as following:
• TCP/IP Network protocol:
IP Address and Port, e.g: 192.168.70.243 and LPT1
Only the ports with a connected printer show up in this window. If
the printer is not in the displayed print list, click Manually specify
the print server and do the following: Enter the print server's IP
address in the IP Address field and choose a port in the Print server
port field:
e.g., 192.168.70.243 and LPT1
The available ports are:
Ports available
AXIS 5400+
AXIS 5600+
Parallel port 1 Parallel port 2
LPT1 —
LPT1 LPT2
AXIS 5400+ / AXIS 5600+ User's Manual
Serial port
—
COM1