Maintenance; Maintenance Chart - Snapper 5900935 Operator's Manual

Regular Maintenance

Maintenance

Maintenance Schedule & Procedures
The following schedule should be followed for normal care of your rider and mower. You will need to keep a
record of your operating time. Determining operating time is easily accomplished by observing the hour meter.
RIDER MAINTENANCE
Before Each Use
Check Safety Interlock System
Check Rider Brakes
Check Rider / Mower for loose hardware
Every 100 Hours or Annually*
Check Gearbos Oil Level***
Clean Deck & Check / Replace Mower Blades
Lubricate Rider & Mower**
Clean Battery & Cables
Check Tire Pressure
Check Hydraulic Oil**
Every 250 Hours or Annually*
Change Hydraulic Oil Filter**
* Whichever comes first.
** More often in hot (over 85° F; 30° C) weather or
dusty operating conditions
*** Change gearbox oil after first 100 hours and every
500 hours thereafter (See Gearbox Maintenance).
28
ENGINE MAINTENANCE
Before Each Use
Check Engine Oil Level
Check Engine Coolant Level
Check & Clean Radiator Screens
Check / Clean Cooling Fins & Intake**
Every 25 Hours
Check Fuel Filter / Drain Water Seperator
Refer to Engine Manufacturer's Owner's Manual
Service Air Filter**
Change Oil & Filter
Check / Replace Spark Plugs
Annually
Change Engine Coolant
* Change original engine oil after first 5 hours of
operation.
** More often in hot (over 85° F; 30° C) weather or
dusty operating conditions.
www.SnapperPro.com