Download Print this page

Zanussi 30L User Manual

Electrical water heater calore control


Quick Links

User manual
Electrical Water Heater
Calore Control
30L- 40L- 50L- 60L- 80L



Summary of Contents for Zanussi 30L

  • Page 1 User manual Electrical Water Heater Calore Control 30L- 40L- 50L- 60L- 80L...
  • Page 2: Table Of Contents

    Should the appliance be sold or  Zanussi electric water heaters are manufactured transferred to another owner, or should you move and tested in accordance with valid regulations. the house and leave the appliance, always ensure ...
  • Page 3: Waste Of Electrical Equipments

    - Connect the appliance to the power source with a 1.2mm cable for heating element power 1200 and 1500 watt , and 2mm cable for heating element power 2000 watt. Distance from appliance location to the power supply should be not more 5m long.
  • Page 4: Control Panel

    (ON state or OFF - Press Increment or decrement buttons to adjust the state ) according to the setting temperature and the desired temperature from 35 °C to 80 °C. currently measured temperature.
  • Page 5: Features

     All the repair and maintenance must be carried out by to keep the performance of it. customer service authorized technicians.  Dissolvent products are not allowed for the cleaning.  A clean soft cloth or wet sponge can be used for the cleaning
  • Page 6: What To Do If

    60 unit fail to disconnect the main seconds power from the heater at its maximum setting temperature (80°C)
  • Page 7: Technical Data

    Technical data Dimensions Power Operating Safety Valve (mm) Capacity (Watt) Pressure pressure (Liter) (bar) 220V ,50/60Hz ((bar)10 pascal) 1200 1200 1200 (6)0.6 7±1 1200 2000 1000

This manual is also suitable for: