Parts And Functions; Loading Of The Battery; Clock Set; Remote Controller - Haier Platinum Series Operation Manual

Parts and Functions

Indoor Unit

1
2
3
5
1

Remote controller

5 4
8 7
6
POWER/SOFT button is not available for 09k 12k.

Loading of the battery

4
Load the battery,then put on the cover again.
Note:
The distance between the signal transmission head and the rece-
iver hole should be within 7m without any obstacle as well.
When electronic-started type fluorescent lamp or change- over
type fluorescent lamp or
room, the recei ver is apt to be disturbed in receiving the signals,
so the distance to the indoor unit should be shorter.
Full display or unclear display during operation indicates the
batte ries have been used up. Please change batteries.
If the remote controller can't run normally during operation, please
remove the batteries and
Hint:
Remove the batteries in case won't be in use for a long period. If
there is any display after taking-out, just press reset key.
1
Remove the battery cover;
2
Load the batteries as illustrated.
2 R-03 batteries, resetting key
(cylinder);
3
Be sure that the loading
e" + "/"-";
is in line with th
wireless telephone is installed in the
reload several minutes later.