Zanussi ZGG96624 User Manual
Hob
Hide thumbs
Also See for ZGG96624:
- User manual (48 pages) ,
- User manual (44 pages) ,
- User manual (16 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Zanussi ZGG96624
Summary of Contents for Zanussi ZGG96624
- Page 1 User manual ZGG96624...
-
Page 2: Table Of Contents
• Cleaning and user maintenance shall not be made by children without supervision. General Safety • The appliance and its accessible parts become hot during use. Do not touch the heating elements. • Do not operate the appliance by means of an external timer or separate remote-control system. www.zanussi.com... -
Page 3: Safety Instructions
The isola- tion device must have a contact opening width of minimum 3 mm. www.zanussi.com... - Page 4 • Do not use water spray and steam to clean • The vapours that very hot oil releases can the appliance. cause spontaneous combustion. • Do not clean the burners in the dishwasher. www.zanussi.com...
-
Page 5: Product Description
3. Adjust the flame after it is regular. Always light the burner before you put cookware. If after some tries the burner does not light, check if the crown and its cap are in To light the burner: correct positions. www.zanussi.com... -
Page 6: Helpful Hints And Tips
• If possible, always put the lids on the pans. Burner Diameters of cookware • When the liquid starts to boil, turn down the Triple Crown 180 - 260 mm flame to barely simmer the liquid. Rapid 180 - 260 mm www.zanussi.com... -
Page 7: Care And Cleaning
– Stop the appliance and let it cool the pan supports by hand and dry them. If down before you clean: limescale rings, necessary, remove stubborn stains with a water rings, fat stains, shiny metallic dis- paste cleaner. www.zanussi.com... -
Page 8: Troubleshooting
5 seconds. The gas ring burns unevenly • Burner crown is blocked with • Make sure that the injector is food residues not blocked and the burner crown is clear of food particles. www.zanussi.com... -
Page 9: Installation
The connection must be done according to Gas Connection regulation NBN D 5I.003. It is necessary that the connection to the gas mains are carried out by means of an AGB tap. www.zanussi.com... - Page 10 – expired term is not due. pass screw in. If one or more defects are visible, do not repair • If you change from liquid gas to natural gas the pipe, but replace it. G20/G25 20/25 mbar, undo the by-pass www.zanussi.com...
- Page 11 "N". The brown (or black) to remove and let an easy access in case a phase cable (fitted in the terminal block con- technical assistance intervention is necessary. tact marked with "L") must always be con- nected to the live phase. www.zanussi.com...
-
Page 12: Technical Information
3.0 kW Semi-rapid Semi-rapid burner: 2.0 kW Rapid Auxiliary burner: 1.0 kW Triple Crown TOTAL POWER: G20/G25 (2E+) 20/25 mbar = 13 kW G30 (3+) 28-30 mbar = 931 g/h G31 (3+) 37 mbar = 914 g/h Gas burners www.zanussi.com... -
Page 13: Environment Concerns
>PE<,>PS<, etc. Discard the packaging mate- otherwise be caused by inappropriate waste rials as household waste at the waste disposal handling of this product. For more detailed facilities in your municipality. www.zanussi.com... - Page 14 www.zanussi.com...
- Page 15 www.zanussi.com...
- Page 16 www.zanussi.com/shop...