Installation - Zanussi ZEE6940 User Manual

If there is a fault, first try to find a solution to the
problem yourself. If you cannot find a solution to
the problem yourself, speak your dealer or the
local Service Force Centre.
If you operated the appliance incorrectly,
or the installation was not carried out by a
registered engineer, the visit from the customer
service technician or dealer may not take place
free of charge, even during the warranty period.
These data are necessary to help you
quickly and correctly. These data are
available on the supplied rating plate.
• Model description .................
1
MOD.
PROD.NO.
SER.NO
DATA
MODEL
Stick it on Guarantee Card and send this
1
part
Stick it on Guarantee Card and keep this
2
part

Installation

Warning! Refer to the Safety chapters.
Important safety requirements
Install the hob accordingly to the IEE Wiring
Regulations (Current Edition).
For appliances installed in the Republic of Ire-
land please refer to the ETCI Rules for Electri-
cal Installations.
Detailed recommendations are contained in the
British Standards Codes Of Practice: B.S.
8
2
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
MODEL
• Product number (PNC) .................
• Serial Number (S.N.) .................
Use the original spare parts only. They are
available at Service Force Centre and approved
spare parts shops.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
3
MOD.
PROD.NO.
0049 SER.NO.
Stick it on instruction booklet
3
6172/ B.S. 5440, Par. 2 and B.S. 6891 Cur-
rent Editions.
Location
The appliance is of the type X and it has to be
assembled in or adjacent to furniture according
to the regulations in force (I.E.C. 335.2.6).
Make sure that there is a minimum distance of
55 mm between the rear cut out edge and the
wall.
TYPE
230V-50Hz
IP20
www.zanussi.com