Simpson 904 Instruction Manual page 23

Oven with eziset
Table of Contents

Advertisement

Removing the Grill Dish and Shelves
• Slide grill dish and shelves towards you
until they reach the front stop
• Tilt them up at the front to clear the side
supports.
• Lift them clear.
• Wash the grill dish and insert the shelves
in hot soapy water.
• Reverse the above steps to put the grill
dish and shelves back again.
• Ensure that they are placed between the
2 support wires.
Note: Grill dish
support wires to be
on top.
Releasing the element -
Multifunction Ovens
We have designed the upper element with
a hanger clip to help you reach your oven
roof for cleaning.
• Lift element up carefully.
• Pull hanger clip forward.
The element will drop down freely.
Removing the Shelf Supports
• Grasp the shelf supports at the front
• Pull them inwards.
• To install the shelf supports, first insert the
rear hook to the rear hole.
• Then locate the front peg into the front
hole and push in firmly.
3
23

Advertisement

Table of Contents
loading

Related Products for Simpson 904

This manual is also suitable for:

906616912807808911

Table of Contents