The Preparation Of Laundry Before Washing; Names And Functions Of Control Panel - Zanussi ZTL75 User Manual

INSTALLATION INSTRUCTIONS

THE PREPARATION OF LAUNDRY BEFORE WASHING

● Make sure that nothing remained in pocket. (Pin, coin or something like possibly
damage clothes or washing machine, and the extra noise occurred may cause
trouble to washing machine).
● Overturn the clothes to get rid of scraps.
● Wool items like women underwear, articles with embroider, nylon etc, should be
placed in a laundry net for extra protection.
● Close the fastener and tie loose laces.
● Brush the dirty parts like dust, sand.
● Put light clothes down. Please pause operation and push it into water
when it floats up.
● Please separate washing white clothes from coloured clothes, coats from underwear.
6
mm

NAMES AND FUNCTIONS OF CONTROL PANEL

1.TIMER And PRESET Indicators
● This indicator shows remained time during washing.
● When setting COURSE, the digital display indicates time or times.
● This indicator shows when the washing is finished during presetting.
● When abnormal conditions occur, the indicator will indicate warning.
2.POWER ON/OFF Button
To turn the power on, press the POWER ON/OFF. When you want to turn off the power, press the POWER ON/OFF
again. When washing has finished, the power will be turned off in 5 seconds automatically.
NOTES :
● If you want to change the wash course, turn the POWER ON/OFF off and then on it again.
● If you leave the washer turning on without starting the operation, the power will be turned off in 10 minutes by itself.
3.START/PAUSE Button
● This button can be used to start the washer operation.
●This button can also be used to temporarily stop the washer operation.
To restart the washer operation, press the START/PAUSE button again.
NOTES :
●This is not a cancel button.
●If you want to delete the End Buzzer, press the START/PAUSE button and hold down for about 4 seconds until
beeping stops.
4.TEMP Button
● This button can be used to choose the appropriate
5.WATER LEVEL Button
You can choose the appropriate water level that matches the load size.
6. CHILD LOCK FUNCTION
Press POWER ON/OFF button to switch on the power, and press TEMP button and
WATER LEVEL button for 4 seconds till a sound from buzzer. To restore it, repeat above or
pull out the plug.
When CHILD LOCK was set, the CHILD LOCK on control panel lights, and indicates E5
and buzzes if washer lid open for 5 seconds during washing.
7.COURSE Button
The COURSE Button can be used to set PRESET, SOAK, WASH, RINSE times and SPIN time.
8.SET Button
Press COURSE button till PRESET/SOAK/WASH/RINSE/SPIN light flashes. Then press SET button to choose
you wanted times.
9.PROGRAM Button
● To choose the washing program , press PROGRAM
above flashes.
● When you choose the NORMAL , HEAVY or CUSTOM the washer will automatic judge the water level.
10. Hydrosonic
Press COURSE button and WATER LEVEL button can be used to set or cancel the
Hydrosonic
10
(E.g.) Remaining time is 20 minutes
(E.g.) Two times Rinse
(E.g.) Finish washing 2 hours later
(E.g.) Water does not flow
TEMP that you need.
button. Press it and choose you need program, then
Hydrosonic function.
the light
7