Installation Instructions 4 - Zanussi ZTL75 User Manual

INSTALLATION INSTRUCTIONS
Installing the Bottom Cover
1.Unplug the Power Cord of the washer.
2.Gently lay down the front side of washer on a soft mat or
cushion.(Becareful not to dent the Frame.)
3.Insert the attached Bottom Cover into the hooks of Leg
by straightly pushing until it reaches into the front hooks.
4.Fasten the Bottom Cover with a screw.
5.Gently set the washer upright.
Location of Washer
1.Choose a dry location out of sunlight for the washer.
2.Install the washer on a stable and level surface.
3.Adjust the Adjustable Leg of washer if necessary to make the
washer level as shown in the figure.
● The maximum permissible inclination of the supporting surface
is 2 .
CAUTIONS:
● The washer must be installed so that its bottom opening will be
not obstructed by the carpet etc.
● If the washer installed on the carpeter floor or big stretch floor it
.
may take big vibration
4
Bottom
Cover
Front Back
Leg
Screw
Inclined floor
Plank
Unstable floor
Fundus
Lock Nut
③Tighten
Loosen①
②Down Up
Adjustable Leg
INSTALLATION INSTRUCTIONS
How to Installing the Drain Hose
5