Specifications - TDK NX-7CD Instruction Manual

RADIO
Tuning to radio stations
1. Press FUNCTION(Tuner/CD/AUX/
USB-SD) to select Tuner.
2. Press BAND to select the desired
waveband: FM or MW.
3. Press down on
it. The frequency display begins change
until a radio station with sufficient signal
strength is found. If a FM station is
received in stereo,
4. Repeat step 3 if necessary until you find
the desired station.
To tune to a weak station, press
briefly and repeatedly until you have
found optimal reception.
Programming radio stations
You can store 30 FM and 10 MW stations
to memories respectively.
1. Tune to your desired station (refer to
" Tuning to radio station").
2. Press MEM/CLK SET, preset no. is
flashing.
3. Press FOLDER/PRESET (
select your desired preset no.
4. Press MEM/CLK SET again to confirm
the station to be stored.
5. Repeat the above steps to store other
stations.
Tuning to preset radio stations
• Press FOLDER/PRESET (
the desired preset station is displayed.
or and release
is shown.
or
or ) to
or ) until

SPECIFICATIONS

Supply Voltage
Power Consumption:40W
Radio Frequency Range:FM 87.5 - 108.0 MHz
Power Output
(Subwoofer
(Speaker
Dimensions (H x W x D):
Main Unit
Subwoofer
Satellite Speaker
Net Weight
8
:230V AC/50Hz
MW 522 - 1620 kHz
: Typical 15W at 4ohm
Speaker, THD = 10%
: Typical 7.5W at 8ohm
Speaker, THD = 10%
: 160 x 220 x 80 mm
: 225 x 130 x 230 mm
: 160 x 193 x 60 mm
: 5.4kg