Basic Functions - TDK NX-7CD Instruction Manual

BASIC FUNCTIONS

Switching the system on
• Press , the system will switch to the last
• Press FUNCTION(Tuner/CD/USB-SD/
AUX), the system will switch to the
Switching the system to standby
• Press , the system will switch to
• The volume level, last selected function
and tuner presets will be retained in the
•Press VOLUME
decrease the volume level. Display shows
the volume level "VOL" and a number
To switch off the volume temporarily
•Press MUTE on remote control. Playback
will continue without sound.
•To restore the volume, press MUTE again
or increase the volume level.
• Press EQ repeatedly to select the desired
equalizer mode: PASS, CLASSIC, ROCK,
• Press BBS to switch on the bass
Connecting other equipment
Connect the audio OUT terminals of a TV,
VCR, Laser Disc Player, DVD Player or CD
Recorder to the AUX jack by using audio
cords with mini plugs (not supplied).
/ to increase or
Checking the Clock Time
During power on. Press and hold down on
MEM/CLK SET for more than 1 second,
the display shows current clock time.
T o resume normal display, press MEM/CLK
SET.
Playable media and files
The system is able to playback following
types of media and files.
Media:
• All pre-recorded audio CDs
• All finalised audio CDR and audio CDRW
discs
• MP3-CDs (CD-ROMs with MP3 tracks)
• USB mass storage class device such as
a USB flash memory device, MP3 Player
etc.
• SD memory card
File Format:
• MP3 only
Note:
This System may not playback some USB
mass storage class devices.
This System may not playback some files
even though their formats are listed above.
4