Repeat All; Programming The Disc Tracks - TDK NX-7CD Instruction Manual

OPERATIONS
3. Press and hold
you can select the track that has same
initial letter selected above by pressing
the or
4. Press PLAY (
T o select the folder by searching for its
name.
1. In SD card and USB mass storage class
device playback mode, pressing FIND/
ST/MO once. In MP3-CD playback
mode, press FIND/ST/MO twice. The
name of folder is displayed.
2. Press or
which included your desired track.
3. Press PLAY (
the first track into the folder.
T ext display (for MP3 playback)
• Press and hold down FIND/ST/MO on
remote control for more than 1 second
during playback, the information about the
current track is displayed.
• Press and hold down FIND/ST/MO on
remote control for more than 1 second to
cancel the MP3 information mode.
Different play modes: RANDOM and
REPEAT
You can select and change the various play
modes before or during playback.
RANDOM mode:
• Press RDM on the remote control, all of
tracks are played in random order.
• Press RDM again to cancel random
mode.
REPEAT mode:
Press REPEAT on remote control repeatedly
to activate/deactivate or select repeat play
mode.
• REPEAT:
to repeat the current track. "REPEAT" is
displayed.
or , and then
.
) to start playback.
to search the folder
) to start playback

• REPEAT ALL:

to repeat the all of tracks. "REPEAT ALL"
is displayed.
• REPEAT FOLDER (playback MP3):
to repeat all the tracks in the folder.
"REPEAT FOLDER" is displayed.
• To cancel repeat play, press REPEAT
button repeatedly until the repeat indicator
goes off.

Programming the disc tracks

Programming tracks is possible when
playback is stopped. Up to 64 tracks can
be stored in the memory in any order.
Playback Audio CD:
1. Press MEM/CLK SET on remote control
to enter the programming mode.
2. Press or
your desired track number.
3. Press MEM/CLK SET to confirm the
track number to be stored.
4. Repeat step 2-3 to select and store all
desired tracks.
Playback MP3:
1. Press MEM/CLK SET to enter the
programming mode. The folder no. is
flashing.
2. Press or
your desired folder.
3. Press MEM/CLK SET to confirm the
folder and then the track no. is flashing.
4. Press or
your desired track.
5. Press MEM/CLK SET to confirm the
track number to be stored.
6. Repeat step 2-5 to select and store all
desired tracks.
To start playback of your program, press
PLAY ( ).
To cancel program, press STOP button
once when playback is stop or twice during
playback.
6
repeatedly to select
repeatedly to select
repeatedly to select