ADTRAN Express 3000 SP User Manual page 83

S-Registers List
Function
Command
Auto Answer
S00
Escape Character
S02
End of Line
S03
Character
Line Feed
S04
Character
Back Space
S05
Character
Connect
S07
Time
Call Rejection
S08
61203153L3-20
Appendix A. AT Commands and S-Registers
Determines how the Express 3000 SP answers an
incoming call.
0 = Disable (Express 3000 SP does not answer call).
1 = Enable (Express 3000 SP answers all calls).
2 = Dump all calls.
Determines which key or character (in ASCII code)
defines the escape command. The standard escape
character is a plus (+) sign (ASCII value of 43 decimal).
To change the character set, set S2 to the desired ASCII
value.
Range = 0 to 127
Determines which key or character (in
ASCII code) ends a command line. The standard end-of-
line character is the carriage return (ASCII value of 13
decimal).
Range = 0 to 127
Determines which key or character (in
ASCII code) advances the cursor to the next line after
ending a command line or after an Express 3000 SP
message. The standard character is the line feed (ASCII
value of 10 decimal).
Range = 0 to 127
Determines which key moves the cursor back one space to
erase a character. The standard character is the backspace
(ASCII value of 8 decimal).
Range = 0 to 127
Determines how long the Express 3000 SP waits for an
outgoing call to be answered.
15 = 15 seconds
30 = 30 seconds
60 = 1 minute
120 = 2 minutes
240 = 4 minutes
Determines which incoming voice calls the Express 3000
SP will reject.
0=Disables
1=Reject anonymous calls only
2=Reject calls on call rejection list only
3=Reject anonymous and call rejection list numbers
Express 3000 SP User Manual
Features
A-9