Appendix C Loop Status Messages - ADTRAN Express 3000 SP User Manual

Loop Status Messages
Appendix C
This appendix lists the status line messages and their definitions.
Call Connect B1
Bearer channel 1 is connected and is active.
Call Connect B2
Bearer channel 2 is connected and is active.
Call Connect B1/B2
Bearer channels 1 and 2 are active.
Disconnecting
The current phone call is being disconnected (hung up).
Link Down
The network interface is not in sync.
Network Loopback
The Express 3000 SP has been commanded to perform an
ISDN loopback toward the network.
Ready
The unit is ready to make or accept a call.
Ringing
The phone number just dialed is ringing.
xxxxx nnnn
A rate adaption is running at the bit rate specified by nnnn.
xxxxx Quitting
A rate adaption protocol is turning off.
61203153L3-20 Express 3000 SP User Manual C-1