Chapter 3 Using The Express Configuration Program - ADTRAN Express 3000 SP User Manual

Using the Express
Chapter 3
Configuration Program
The Express 3000 SP comes from the factory preconfigured and ready
to use. You can, however, use the ADTRAN Express Configuration
Software to change and restore these settings. The program also con-
tains other functions (see Table 3-1).
Table 3-1.
ADTRAN Express Configuration Program Options
Option
isdn setup Configures an ISDN profile.
profile setup Configures a User profile.
diagnostics Provides detailed information about the status of the
Express 3000 SP while it is off-line. You can also
upgrade the unit firmware from here.
preferences Allows you to turn on or off automatic user
configuration features such as Caller ID.
wizard Guides you through the configuration process.
about Displays version and registration information.
help Provides on-line help.
exit Closes the software and, depending on the
preferences settings, opens the Tray Tool.
You can also configure the Express 3000 SP via VT-100
terminal emulation (see Chapter 4) and using the AT
Commands (see Appendix A).
The ADTRAN Express Configuration program provides a graphical
user interface (GUI) that lets you configure your unit, run diagnostic
tests, display and specify connection settings, apply certain preferenc-
es, run the Express Configuration Wizard, view the software version
61203153L3-20
Function
Express 3000 SP User Manual 3-1