Ibm 468X/9X (Ls 4005I) - Symbol LS 400Xi Product Reference Manual

LS 400Xi Product Reference Guide
4. If necessary, plug a power supply into the power port on the Synapse cable.

IBM 468X/9X (LS 4005i)

Plug the SDL modular connector at the end of the selected scanner cable into the appropriate
port (5, 5B, 9B, 9C, 9E, or 17). Check that the connection is secure. No additional power
connections are necessary.
the covers removed. Note that the unit may be connected to one hardware port, and
configured for a different software port using the bar codes in
page 5-8. The hardware ports available determine how the unit is connected to the host,
while the software port configuration determines how it communicates.
LS 4005i
2-8
Figure 2-7. Keyboard Wedge Configuration
Figures 2-9 through
IBM 4683/84/93/94 Cash Register
Figure 2-8. Typical System Configuration
Host
Synapse
"Smart"
Cable
Power Supply
(as required)
2-12 show the rear of the IBM terminals with
LS 4004i
IBM 46XX Host Types on