LS 1004 Scanner Product Reference Guide
IBM 468X/9X
Plug the SDL modular connector at the end of the selected Synapse "Smart" cable into
the appropriate port (5B, 9B, 9C, 9E, or 17). Check that the connection is secure. To
install an LS 1004 on an IBM 468X/469X host:
1. Connect a synapse adapter cable to the scanner, using the procedure described in
"Installing the Cable" on page 1-4.
2. Plug the other end of the adaptor cable into the synapse cable's female connector.
3. Scan the appropriate port address (see your Synapse Guide for details).
Wand Emulation, IBM 468x, IBM 469x, OCIA, and OCR
A Synapse Adapter Cable is required when connecting the LS 1004 to any of these hosts using
Synapse. See the instructions packed with the appropriate Synapse cable.
1-8
Figure 1-7. RS-232C Operation