Locating Tv Controls And Connectors - HP 1080p User Manual

Locating TV Controls and Connectors

The TV contains controls (indicators and buttons) and connectors.
A B
TV Controls
The TV indicators are located on the front of the TV, and the buttons are located on the right side.
TV button Description
A: Power light Power light shows whether the TV is on or off. The light is blue when TV is plugged in but turned off.
The light is amber while the TV is powering up after you turn it on, and then it goes off after about
30 seconds. The light is off when the TV is not plugged in.
B: Remote control Remote control sensor is the location where you point the remote control.
sensor
POWER Power turns the TV on or off.
MENU Menu opens (or closes) the onscreen display (OSD).
SELECT Select starts the Auto Sync function for a connected PC signal source (PC Input).
[PC Auto Sync] In an OSD menu, selects the highlighted item.
SOURCE Source selects the input source: Press Source to open the list of input sources. Press the Channel buttons
to select the input source, and press Select. Press Source to close the list.
In an OSD menu, functions as the Back button, or moves up one item or menu level.
Channel buttons select the next lower or higher channel.
In an OSD menu, move up or down in the menu.
Volume buttons increase or decrease the sound level.
In an OSD menu, move right or left in the menu, or adjust an item.
Getting to Know Your TV
3